First Side
1.25 Radel Stock – Extends 19 mm above chuck (.75 inches)
(G55) 3-Jaw Chuck
T07 Spot Drill
IF USING INSERTS:
T13 – No. 13 Twist Drill (4.7mm or .1850) Drilling
T21 T12 – .375 Carbide cutter – Cavity Mill
T22 – Groove with Engraving Cutter
Second Side
(G54) Mini vise fixture
2mm excess stock permissible
T21 T12 – .375 carbide plastics cutter – Cavity milling
90 Deg. Countersink, Carbide Router tip – Chamfering
