Spindle Nose Taper

Objective

To develop mastery of parametric 3D modeling. To expose students to the concept of part families.  To give practice interpreting working drawings, including chart drawings and section views.

Assignment

Create a parametric model of the spindle nose shown.  You will need to create one model for the 30 to 60 series and another for the 65 to 80 series (two “parent” models).  You must include the mounting holes for the tenons, but you do not need to assemble the tenon in place (for this assignment).

Generate a family of at least three taper designations for each series (Six “child” models).

REFERENCE ONLY – NOT FOR DESIGN.

30to60taper

REFERENCE ONLY – NOT FOR DESIGN.

65to80taper

REFERENCE ONLY – NOT FOR DESIGN.

table 1a

REFERENCE ONLY – NOT FOR DESIGN.

table1b

REFERENCE ONLY – NOT FOR DESIGN.

tenon detail1

REFERENCE ONLY – NOT FOR DESIGN.

 

tenon detail2

REFERENCE ONLY – NOT FOR DESIGN.

table 2

REFERENCE ONLY – NOT FOR DESIGN.

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to Top