Engraving Cutter


Engraving Cutter RC3-501

Engraving Cutter Assembly Drawing

Holder Drawing (redacted)

Plug Drawing (redacted)


Part 1 – Machine the cutter blank

  • Cut to approx length
  • Face to size
  • Turn taper
  • Machine Flats
  • Heat treat (quench & temper)
  • Target hardness: Rc = 60 to 62
  • Surface Grind Flats
  • Grind relief

Part 2 – Design holder

Sliding fit

Press fit plug

Cone on end

Radius on opposite end


Engraved base

Optional OD (knurls, etc.)

Part 3 – Build Holder



Scroll to Top