Homework:

Use feature modeling to model this block.  It is 1.5 inches tall, 1 inch wide and 1.5 inches long.  The pocket in the middle is .45 inches wide, and the wall thickness is the same at the bottom as it is on the sides. The holes are .200 diameter, through, centered, and spaced .5 apart (in the long direction).

Filename: LASTNAME_04.prt

Video (no sound)

Lecture Notes:

Part Navigator

• Timestamp Order

Feature Modeling

• Design Feature
• Detail Feature
• Associative Copy
• Combine / Separate bodies
• Edit Features
• Offset / Scale
• Trim bodies
• Datum/Point
• Align
• Position features
• Primatives

Printer Friendly