About alignments.
- Degrees of freedom
- Level
- Rotate
- Origin
Create Features
- On fixture
- Plane
- Line
- Point
- [Construct a point (yellow)]
Create Alignment
- Insert -> Alignment -> New
Name alignment
Create a circle around the pin
- Use Z Plus workplane
Dimension circle location
- Nominal is 1.0 in x and y
- Tolerance is +/-.020
- From datums B & C
2D Dimension distance of base (from datums B&C)
- Nominal is 2.0
- Tolerance is +/- .020
Parallelism
Flatness
Recall Alignment
